Microtek MiniLink Instructions d'exploitation télécharger pdf (Page 12)

B. MULTI-CONNECT SYSTEMS (cont’d)

Administration Page (Section E below) manually. If you ordered a complete system with

multiple Client SU WEMs, they have been pre-configured with IP addresses as follows:

Client SU WEM Serial Number IP Address

Unit 1 00511* 192.168.1.201

Unit 2 00512* 192.168.1.202

Unit 3 00553* 192.168.1.203

Unit 4 00624* 192.168.1.204

Unit 5 00714* 192.168.1.205

(*Actual serial numbers will be different)

Note: The lowest serial number of the Client SU WEM you received is pre-configured with IP address

192.168.1.201. The next higher sequential serial number of the Client SU WEMs you received has IP

address 192.168.1.202, etc. If you ordered an additional Client SU WEM separate from your original

order, the default address is 192.168.1.201. The IP address in this additional unit will need to be changed

manually to the next available IP address before installation. An IP address-numbering table is included

in the SYSTEM INSTALLATION NOTES section of this manual on page 17 for your convenience in

keeping track of IP address changes and other notes about your specific application. The green LED on a

multi-connect Host AP will flash to indicate the number of Client SU units connected to it.

WEB PAGES

A. LOGIN

The default user name for each WEM is admin and the password is admin.

Note: The user name and password are case sensitive.

- 9 -

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Pas de commentaire

Microtek MiniLink Instructions d'exploitation Page 12