Microtek Digital Video Camera Guide de l'utilisateur télécharger pdf (Page 62)

The flash does not fire.

A1: Flash function is disabled when shooting video clips.

A2: The flash mode is set to Flash off.

• Select any flash mode except “Flash off”.

A1: The Mode is set to the incorrect mode.

• Set the Mode to Playback mode (

A: The SD card is write-protected.

• Set the write-protected tab on the SD card to the unlocked position.

A1: The Mode is set to the incorrect mode.

• Set the Mode to Playback mode (

A2: The “Video Out” setting is set to the incorrect system.

• Enter the Setup mode, set Video Out to “NTSC” or “PAL” depending

on your video output system.

A3: The DV camera is disconnected from the TV set.

• Make sure the video cable is properly connected to both the DV

camera and the TV set.

Images or video/audio clips cannot

be played back.

The DV camera cannot delete

images or video/audio clips.

Images or video/audio clips cannot

be played back on TV.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Microtek Digital Video Camera Guide de l'utilisateur Page 62